Filters

System

253 products

Showing 241 - 253 of 253 products

Showing 241 - 253 of 253 products
View
Gate Discharge Rock ValveGate Discharge Rock Valve
Gate Discharge Rock Valve
$109.91
Seal Set for Hydraulic Auger Motor
Seal Set for Hydraulic Auger Motor
$26.67
S-Tube S2318 Bigmouth 90mm
S-Tube S2318 Bigmouth 90mm
$1,695.75
Ram Flange Style DN230-9
Ram Flange Style DN230-9
$191.53
Weld-On End, 5" HD, C-Bored, 1.25" Long, Heat Treated, 1/4" WallWeld-On End, 5" HD, C-Bored, 1.25" Long, Heat Treated, 1/4" Wall
Weld-On End, 5" HD, C-Bored, 1.25" Long, Heat Treated, 1/4" Wall
$33.28
DN180 (7") Cast Steel to DN150 (6"), Reducing Elbow W/ OffsetDN180 (7") Cast Steel to DN150 (6"), Reducing Elbow W/ Offset
DN180 (7") Cast Steel to DN150 (6"), Reducing Elbow W/ Offset
$675.00
DN150 (6") Cast Steel, Backend Elbow, Long TangentDN150 (6") Cast Steel, Backend Elbow, Long Tangent
DN150 (6") Cast Steel, Backend Elbow, Long Tangent
$487.50
DN150 (6") Cast Steel, 90° Elbow, ZX Ends
DN150 (6") Cast Steel, 90° Elbow, ZX Ends
$308.75
Elbow, 7" to 6" Cast FlangeElbow, (DN180) 7" to (DN150) 6" Cast Steel Reducing (Schwing)
DN180 (7") Cast Steel to DN150 (6"), Reducing Elbow
$487.50
DN180 (7") Cast Steel W/ Hard Facing, to DN150 (6"), Reducing Elbow
DN180 (7") Cast Steel W/ Hard Facing, to DN150 (6"), Reducing Elbow
$749.25
Devil Catcher, 5" MetricDevil Catcher, 5" Metric
Devil Catcher, 5" Metric
$121.88
Break-Out Straight Section, Male to Female Ends, Hard Faced, 340mmBreak-Out Straight Section, Male to Female Ends, Hard Faced, 340mm
Break-Out Straight Section, Male to Female Ends, Hard Faced, 340mm
$549.10
Clamp SH-H 125/5.5Clamp SH-H 125/5.5
Clamp SH-H 125/5.5
$76.60

ONE-STOP SHOP WITH WORLDWIDE DISTRIBUTION

The highest quality products at the lowest prices.